Momcozy DinerPal Krzesełko do Karmienia

Assembly is simple. An Allen wrench (5/32 in / 4mm) is included.Recommended assembly order:

• Attach the rear legs with Flat Head Socket Head Screws (M6 × 16mm).
• Attach the front legs with Flat Head Socket Head Screws (M6 × 16mm).
• Attach the five-point harness.
• Attach the Baby Set, then the tray (if using tray mode).

Seat adjustment: Choose between two seat depth positions (forward/back) and adjust with the screws for better support as your baby grows.

To install the Baby Set smoothly:

Step 1: Set the seat height to the highest position first.
If the seat isn’t at the highest setting, the Baby Set may not “click” into place.

Step 2 :

1. Insert the two upper connectors first (top holes).
2. Make sure the top connectors are fully seated/locked in.
3. Then press down so the lower connectors click into the lower holes.

Important note: Don’t force the lower connectors until the top connectors are fully locked—otherwise the upper clips could break.

Tip: If it won’t click, re-check the seat height (highest position), confirm the top connectors are fully locked, then try again: upper first → press down to lock.

In general:

• Remove the tray and Baby Set (if installed).
• Install the belly bar using Flat Head Socket Head Screws (M4 × 16mm), then check that everything is secure and stable before use.

This wooden high chair is built for multiple stages—from baby feeding to toddler independence, learning tower mode, and even an adult chair—thanks to its convertible high chair design (including toddler chair and toddler tower high chair combo style use).For the safest fit, use the Baby Set + five-point harness for younger sitters (with or without the tray).With adjustable seat height, seat depth, and footrest, it’s easy to adapt for different ages and different situations.